KP-6M: Standard Test & Measurement Omni Mic

This omnidirectional 1/4 inch directional condenser microphone can be used easily with any test/calibration system for analog as well as PC-based software. The bullet-nozzle achieves extremely low interference and a neutral capture pattern. A specific
measurement tool that sounds “musical” on instruments and LIVE recordings, as well. The KP-6M has it’s own new quiet pre-amp design with fast, transformerless electronics. This microphone is being used a lot over in the States for recording acoustic guitars.

If you want, T.H.E. will match a special pair for you. The ‘pairing’ is done free of charge at the production site in the United States.

KP-6M, technical stats (PDF)

This microphone comes in a nice wooden box and microphone clip.

TT-3M Titanium Test & Measurement Omni Mic

TT-3M: Titanium test microphone

An omni-directional mic designed for critical measurement as well as “state-of-the-art” field or studio use, the TT-3M is designed for years of trouble-free use in ANY environment. With its’ own ultra-fast transformerless electronics, this (Type 1.5) reference mic is a new standard in and of-itself. With a “flat” frequency response of 5hz to over 20khz, this mics’ dynamic range, high output and low distortion reach the theoretical limit of 48v phantom powering.

 

TT-6M, technical stats (PDF)

This microphone comes in a nice wooden box and with microphone clip (see above picture)